skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 200793d ? skyworks proprietary information ? products and product in formation are subject to cha nge without notice ? aug ust 15, 2014 1 data sheet silicon beamless schottky diodes: pairs and quads applications ? microwave mic assembly and automated high volume manufacturing lines ? mixers features ? mechanically rugged design ? three barrier heights for optimized mixer performance ? wide product range: series pair, ring, bridge, and eight-diode rings ? use in ring or crossover designs in double balanced mixers ? virtually any lo requirement can be met with choice of barrier height ? 100% dc tested on water ? available on film frame or waffle pack s kywork s green? product s are compliant with all applicable legi s lation and are halogen-free. for additional information, refer to skyworks de?ition of green , document number s q04-0074. description skyworks beamless diode family is designed for a high degree of device reliability in both commercial and industrial uses. the diodes are designed to offer the utmost in performance as well as achieving price sensitive cost targets for commercial systems. assembly and handling procedure the process flow for assembly is: ? die attach using nonconductive epoxy ? wire bond ? encapsulation (nonconductive epoxy) die attach methods all leadless chips are compatible with both eutectic and conductive epoxy die attach methods. eutectic processes use sn/au or sn/pb solder. nonconductive die attach is recommended. packing methods 1. g el pak 2. wafer on film frame (rejects are marked with ink): C diced, ready for pick and place C unsawn, whole wafer, 7-mil thick, maximum wire bonding two methods can be used to connect wire, ribbon, or wire mesh to the chips: ? thermocompression ? ballbonding skyworks recommends use of pure gold wire. electrical and physical specifications absolute maximum ratings for the beamless schottky diodes are provided in table 1. electrical specifications are noted in table 2. spice model parameters are defined in table 3. a typical bonding configuration is illustrated in figure 1. downloaded from: http:///
data sheet ? silicon beamless schottky diodes skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 2 august 15, 2014 ? skyworks prop rietary information ? products and product information are s ubject to change without notic e ? 200793d table 1. absolute maximum ratings (note 1) parameter symbol minimum maximum units peak inverse voltage piv v b C supply current i max 50 ma/v power dissipation (cw) p diss 75 mw/junction storage temperature t st g C65 +175 ? c operating temperature t op C65 +150 ? c electrostatic discharge: human body model (hbm), class 0 esd < 250 v note 1: exposure to maximum rating conditions for extended periods may reduce device reliability. there is no damage to device with on ly one parameter set at the limit and all other parameters set at or below their nominal value. exceeding any of the limits listed here may result in permanent damage to the d evice. caution : although this device is designed to be as robust as possible, electrostatic discharge (esd) can damage this device. this devi ce must be protected at all times from esd. static charges may eas ily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. industry-standard esd precautions should be used at all times. table 2. electrical specifications (per junction) (1 of 2) (note 1) part number band barrier v f i f = 1.0 ma (mv) v f i f = 1.0 ma (mv) c j (note 2) v r = 0 v, f = 1 mhz (pf) r s i f = 5 ma ( ) v b @ 10 a (v) outline drawing number min max max mi n max max min ring quad (note 3) dmf3926-000 s low 200 260 10 0.30 0.50 5 C 551-002 dme3927-000 s medium 300 400 10 0.30 0.50 5 C 551-002 dmj3928-000 s high 500 600 10 0.30 0.50 5 C 551-002 dmf3942-000 x low 250 310 10 0.15 0.30 8 C 551-002 dme3943-000 x medium 325 425 10 0.15 0.30 8 C 551-002 dmj3944-000 x high 550 650 10 0.15 0.30 8 C 551-002 bridge quad (note 3) dmf3929-000 s low 200 260 10 0.30 0.50 5 2 551-004 dme3930-000 s medium 300 400 10 0.30 0.50 5 3 551-004 dmj3931-000 s high 500 600 10 0.30 0.50 5 4 551-004 dmf4102-000 x low 250 310 10 0.15 0.3 14 2 551-004 dme4101-000 x medium 325 425 10 0.15 0.3 14 3 551-004 dmj4103-000 x high 550 650 10 0.15 0.3 14 4 551-004 series pair (note 3) DMF3932-000 s low 200 260 10 0.30 0.50 5 2 551-012 dme3933-000 s medium 300 400 10 0.30 0.50 5 3 551-012 dmj3934-000 s high 500 600 10 0.30 0.50 5 4 551-012 back-to-back ring series pair (note 3) dmf3935-000 s low 200 260 10 0.30 0.50 5 C 551-056 dme3936-000 s medium 300 400 10 0.30 0.50 5 C 551-056 dmj3937-000 s high 500 600 10 0.30 0.50 5 C 551-056 downloaded from: http:///
data sheet ? silicon beamless schottky diodes skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 200793d ? skyworks proprietary and confiden tial information ? produc ts and product information ar e subject to change witho ut notice ? august 15, 2014 3 table 2. electrical specifications (per junction) (2 of 2) (note 1) part number band barrier v f i f = 1.0 ma (mv) v f i f = 1.0 ma (mv) c j (note 2) v r = 0 v, f = 1 mhz (pf) r s i f = 5 ma ( ) v s @ 10 a (v) outline drawing number min max max mi n max max min octoquad ring (note 4) dmf3938-000 s-x low 400 520 15 0.15 0.30 16 C 556-020 dme3939-000 s-x medium 600 800 15 0.15 0.30 16 C 556-020 dmj3940-000 s-x high 1000 1200 15 0.15 0.30 16 C 556-020 back-to-back crossover quad, to 6 ghz dmf3945-000 s low 200 260 15 0.30 0.50 5 C 588-065 dme3946-000 s medium 300 400 15 0.30 0.50 5 C 588-065 dmj3947-000 s high 525 625 15 0.30 0.50 5 C 588-065 n ote 1. performance is guaranteed only under the conditions listed in this table. n ote 2: cj represents total capacitance. maxi mum cj unbalance @ 0 v, 1 mhz = 0.25 pf. n ote 3: matching criteria vf @ 1 ma 15 mv available for matched sets. n ote 4: matching criteria vf @ 1 ma 20 mv available for matched sets. table 3. spice model parameters (per junction) part number prefix i s (a) r s ( ) n t t (s) c jo (pf) m e g (ev) v j (v) xti f c b v (v) i bv (a) dmf3926 2.5 x 10 C7 4 1.04 1 x 10 C11 0.42 0.32 0.69 0.51 2 0.5 2 1 x 10 C5 dme3927 1.3 x 10 C9 4 1.04 1 x 10 C11 0.39 0.34 0.69 0.65 2 0.5 3 1 x 10 C5 dmj3926 9.0 x 10 C13 4 1.04 1 x 10 C11 0.39 0.42 0.69 0.84 2 0.5 3 1 x 10 C5 dmf4102 1.1 x 10 C7 6 1.04 1 x 10 C11 0.22 0.32 0.69 0.495 2 0.5 2 1 x 10 C5 dme4101 2.4 x 10 C9 6 1.04 1 x 10 C11 0.20 0.37 0.69 0.595 2 0.5 3 1 x 10 C5 dmj4103 8.5 x 10 C13 6 1.04 1 x 10 C11 0.20 0.42 0.69 0.800 2 0.5 4 1 x 10 C5 downloaded from: http:///
data sheet ? silicon beamless schottky diodes skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 4 august 15, 2014 ? skyworks prop rietary information ? products and product information are s ubject to change without notic e ? 200793d ring quad c ro ss over quad bond pad 1324 1324 bond pad s3542 figure 1. typical bonding configuration package information skyworks silicon beamless schottky diodes are provided in g el paks and on film frame. package dimensions are provided in figures 2 through 7. downloaded from: http:///
data sheet ? silicon beamless schottky diodes skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 200793d ? skyworks proprietary and confiden tial information ? produc ts and product information ar e subject to change witho ut notice ? august 15, 2014 5 0.015 in (0.381 mm) 0.001 in (0.025 mm) 0.015 in (0.381 mm) 0.001 in (0.025 mm) 3 24 1 0.0035 in (0.089 mm) 0.0035 in (0.089 mm) 4 plcs. schematic 0.006 in (0.18 mm) 0.001 in (0.025 mm) 13 24 s3543 figure 2. 551-002 package dimensions 0.015 in (0.381 mm) 0.001 in (0.025 mm) 0.015 in (0.381 mm) 0.001 in (0.025 mm) 3 4 43 2 1 2 1 0.0035 in (0.089 mm) 0.0035 in (0.089 mm) 4 plcs. schematic 0.006 in (0.18 mm) 0.001 in (0.025 mm) s3546 figure 4. 551-056 package dimensions schematic 0.015 in (0.381 mm) 0.001 in (0.025 mm) 0.015 in (0.381 mm) 0.001 in (0.025 mm) 3 21 3 12 0.0035 in (0.089 mm) 0.0035 in (0.089 mm) 3 plcs. 0.006 in (0.18 mm) 0.001 in (0.025 mm) s3544 figure 3. 551-012 package dimensions s chematic 1 2 3 4 017-1 3 2 1 4 0.004 x 0.004 in (0.10 x 0.10 mm) 4 plc s . 0.020 in (0.500 mm) 0.001 in (0.025 mm) 0.020 in (0.500 mm) 0.001 in (0.025 mm) 0.00 6 in (0.180 mm) 0.001 in (0.025 mm) 0.020 in (0.500 mm) s3545 figure 5. 556-020 package dimensions downloaded from: http:///
data sheet ? silicon beamless schottky diodes skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 6 august 15, 2014 ? skyworks prop rietary information ? products and product information are s ubject to change without notic e ? 200793d measurement tolerance = ?0.001 in (?0.025 mm) 1 6 5 4 3 2 1 6 5 2 3 4 s chematic 0.003 in (0.0 9 mm) 0.008 in (0.20 mm) 0.013 in (0.31 mm) 0.022 in (0.54 mm) 0.01 6 in (0.40 mm) 0.025 in (0. 6 2 mm) au-plated bond pad 0.003 in (0.08 mm) s q. 6 plc s . 0.003 in (0.08 mm) 0.007 in (0.17 mm) s3547 0.004 in (0.0 9 mm) 0.008 in (0.20 mm) 0.017 in (0.42 mm) figure 6. 588-065 package dimensions 0.015 in (0.381 mm) 0.001 in (0.025 mm) 0.015 in (0.381 mm) 0.001 in (0.025 mm) 2 3 41 0.006 in (0.18 mm) 0.001 in (0.025 mm) 0.0035 in (0.089 mm) 0.0035 in (0.089 mm) 4 plcs. schematic 3 4 1 2 s3548 figure 7. 551-004 package dimensions copyright ? 2002-2009, 2011, 2012-2014 skyworks solutions, inc. all rights reserved. information in this document is provided in connection with skyw orks solutions, inc. (skyworks) products or services. these m aterials, including the information co ntained herein, are provided by skyworks as a service to its customers and may be used for info rmational purposes only by the cu stomer. skyworks assumes no res ponsibility for errors or omissions in these materials or the information contained herein. skyworks may change its documentat ion, products, services, specific ations or product descriptions at any time, without notice. skyworks makes no commitment to update the materials or information and shall have no responsi bility whatsoever for conflicts, incompatibilities, or other diff iculties arising from any future changes. no license, whether express, implied, by es toppel or otherwise, is granted to any in tellectual property rights by this document . skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, re production or use of skyworks products, information or mate rials, except as may be provided in skyworks terms and conditions of sale. the materials, products and information are pr ovided as is without warranty of any kind, whether express, implied, statutory, or otherwise, includin g fitness for a particular purpose or use, merchantability, performance, quality or non-infrin g ement of any intellectual property ri g ht; all such warranties are hereby expressly disclaimed. skyworks does not warrant the accuracy or completeness of the information, text, g raphics or other items contained within these ma terials. skyworks shall not be liable for any dama g es, includin g but not limited to any special, indirect, incidental, statutory, or consequential dama g es, includin g without limitation, lost revenues or lost profits that may result from the use of the materials or information, wheth er or not the recipient of mat erials has been advised of the possibility of such dama g e. skyworks products are no t intended for use in medical, lifesaving or life-su staining applications, or other equipment in which the failure of the skyworks products could lead to personal injury, death, physical or environmental damage. skyw orks customers using or selli ng skyworks products for use in such applications do so at their own risk and agree to fully indemnify skyworks for any damages resulting from such improper use or sale. customers are responsible for their products and applications us ing skyworks products, which may deviate from published specifi cations as a result of design de fects, errors, or operation of products outside of published pa rameters or design specifications. customers sh ould include design and operating safeguards to minimize these and other risks. skyworks assumes no liability for applications assistance, customer product de sign, or damage to any equipment resulting from the use of skyw orks products outsid e of stated published specifications or parameters. skyworks and the skyworks symbol are trademarks or registered trad emarks of skyworks solutions, inc., in the united states and other countries. third-party brands and names are for identification purposes only, and are the pr operty of their respective owners. additi onal information, including relevant terms and conditions, posted at www.skyw orksinc.com, are incorporated by reference. downloaded from: http:///
|
